Diy Antique Mirror From Glass

Underneath that is the reflective surface, and finally your glass. Any color can be used.

DIY "Antiqued" Mirror GREAT TUTORIAL! DIY love

Let all the panes of glass dry completely.

Diy antique mirror from glass. Creating the antique mirror patina. I came across an image in a cb2 holiday catalogue with mercury glass above the fireplace mantel. 2.4 apply the paint stripper;

2.6 clean the surface of the mirror; 2.7 prepare the bleach solution; I’ve even seen some antiqued mirrors from anthropologie with turquoise showing through.

For the middle of the glass, i stood up and dripped bigger drops in the center. You need to apply the effects to the backside of your glass.* Blot gently with a paper towel or soft cloth to remove flecks of.

Some of the drops ran on the glass like in the photo above. This sent me down my usual google diy rabbit hole. See how it’s done in the video below!

1 why should one antique a mirror at home? Dab off the vinegar solution. Lie the mirror back down with the backside up and use your paint to paint over the whole backside of the mirror.

22 decoupage mirror ideas | mirror, diy mirror, antique mirror. Secondly, the next step in creating a diy antique mirror is to use a solution of bleach and water 50/50 mixture in a spray bottle and lightly mist over the back of the mirror. Removing a bit of the protective shiny material on the glass with muriatic acid.

I used the same vinegar and water spray bottle and sprayed the mixture around the edge of the glass. In this photo below you can see how the diluted vinegar has caused some of the spray paint to flake off, giving the glass the desired mottled affect of antique mirror. 3 parts to antiquing a mirror.

Seriously… shake it for a long time. A picture frame with glass; The piece can be used as a wall art as it features an antique map, especially if you add a stunning vintage frame.

Shake the mirror spray paint well and apply a thin coat to one side of the glass. Removing the paint from the back of the mirror. I removed the glass panels from the frames and cleaned them with windex.

An antique mirror look seemed to be the perfect solution. Allow to dry for about 2 minutes, then gently blot the beads of water/vinegar with your paper towel — they should lift off areas of the mirror spray in a varied pattern. First, here are the parts of a mirror so you have a better understanding of how to antique it.

Krylon looking glass spray paint. On the back of the mirror you’ll see a painted layer, which is usually gray in color. I came across an image in a cb2 holiday catalogue with mercury glass above the fireplace mantel.

Mirrors have two coats on the back surface—a reflective coating applied directly to the glass, and a layer of paint, usually gray or black, applied over the reflective coating. It has different sizes and shapes and can complement the antique mirror itself for a. While the paint is still wet, spritz the backside of the glass with the vinegar and water solution and blot gently with a paper towel.

This sent me down my usual google diy rabbit hole. You do need access to the entire back of the mirror though, which is where you’ll be doing all the work. Diy technique to create your own antique mirror.

A lot of antiquing happens around the edge of mirrors, so i sprayed the mixture more heavily around the edges. Diy antique mirror of usual clear glass (via www.woodshopdiaries.com) make this beautiful vintage mirror using muriatic acid and paint remover. Krylon looking glass spray paint;

An antique mirror backsplash’s purpose is to protect the mirror from water damage. Glass you want to turn into a mirror (for this example, i used picture frames with glass inserts) glass cleaner (i used windex) and rag. Take the solution and fully spray the glass.

2.3 place the mirror on the work area; 2.8 spray the bleach on to the mirror; I used an antique gold spray paint, because this is the color that i wanted to show through on the front.

2 diy your own antique mirror. Inspiration can come from anywhere. Here's what our glass containers looked like as they began to dry with both sprays applied — notice the fine beading from the water/vinegar solution creating variations in the mirror spray:

I taped the entire area around the glass and used an old towel to cover the rest. This will also remove a little of the paint from the glass in. Shake it, baby, shake it!

Inspiration can come from anywhere. 2.2 get your workspace ready; A spray bottle with a half and half mix of water to vinegar;

Reflective material (usually aluminum, tin, silver or copper melted over the glass) paint; An antique mirror look seemed to be the perfect solution. Use a rag to gently blot each pane of glass to remove any paint that hasn’t adhered, creating a spotted, aged affect on the glass.

This will remove flecks of paint and help to create the mercury glass look of the mirror. Work quickly, as the mirror spray paint dries quickly. First, you’ll need to disassemble your picture frame.

Finally, when everything is dry, paint a layer of black paint over the glass and then flip the window or frame around to reveal your very own “antique” mirror! The water and bleach mixture will eat away the reflective back and allow you to. I even shake it in between coats.

2.5 scrape the paint off the mirror; The process of antiquing a mirror involves removing one of two coats applied to the back of the mirror. Dab the paint and vinegar mixture with a paper towel to create spots where the spraypaint doesn’t stick.

Add more of solution 2, this time spraying it on to etch the. If you are going to stencil the mirror on top of antiquing it you will now add the adhesive stencils to the mirror.

DIY Faux Antiqued Mirror (No Chemicals) Krylon looking